30A ESC For Brushless Motor
480.00 ৳
In stock
30A ESC For Brushless Motor
Specification:
Weight: 25g
Dimensions: 45 x 24 x 11mm
Firmware: Hobbywing
Power input: 5.6V – 13.8V (2-3 cells Li-Poly, OR 5-12 cells Ni-MH Ni-MH / Ni-Cd battery)
BEC: 2A
Constant current: 30A (Max 40A less than 10 seconds)
Feature:
Safe power function: regardless of the throttle stick in any position the motor will not start immediately
Throttle Calibration function: Adapt to different remote throttle travel difference, improve throttle response linearity, with a smooth, delicate feel and excellent speed linear speed
Low Voltage Protection Mode ,Low-voltage protection threshold
Note:
4S lipo not allows to use the ESC.
Pakacge Included:
1 x 30A ESC
Related products
-
Hobbywing Eagle Brushed ESC 20A/30A
1,250.00 ৳ – 1,350.00 ৳Select optionsHobbywing Eagle Brushed ESC 20A/30A Speed Controller For RC Model Specification: Brand Name: Hobbywing Item Name: Eagle 20A/30A Brushed ESC Output: Continuous 20/30A, Burst 30/40A up to 10 seconds Input Voltage: 2-3 cells lithium battery or 4-10 cells NiCd/NiMh battery BEC: 1A / 5V (Linear mode) PWM Frequency: 2 kHz Size: 45 x 21 x …
-
Add to cart
4pcs LANRC 35A BLHeli_S 2-6S Lipo ESC Built-in Programmable RGB LED D-Shot 150/300/600 ONESHOT125 for QAV RC FPV Quadcopter Replaceable Parts Features: EFM8BB2F16G processor Support Dshot600, Dshot300, Dshot150, Oneshot125, PWM Pre-Flashed with BLHeli_S 16.7 Firmware 2-6S support 35A: Continuous current 35A, peak 45A/10s Integrated RGB multi-colour bright LED night light, night flight is even more …
4pcs LANRC 35A BLHeli_S 2-6S ESC Built-in Programmable RGB LEDRead More
-
4 in 1 Brushless ESC BLHeli_S Dshot300-600 2-6S
3,600.00 ৳ – 3,800.00 ৳Select options4 in 1 brushless ESC BLHeli_S Dshot300-600 2-6S 35A / 40A / 45A 35A 4 IN 1 ESC Description: Brand name: Rcharlance Item name: 35A 4 In 1 ESC BLHeli_S Operating voltage: 2-6S Lipo FC power: integrated Maximum continuous operating current: 4*35A Maximum instantaneous operating current: 4*40A Firmware version: BLHELI_S Dshot 16.5 J_H_xx firmware Supports …
-
L293D Motor Driver Shield
220.00 ৳Add to cartDescription: L293D Motor Driver/Servo Shield for Arduino This Arduino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motors or two 4-wire stepper and two 5V ”hobby” servo. It drive the DC motor and stepper with the L293D, and it drive the servo with Arduino”s pin9 and …
-
Mystery Cloud 30A Brushless ESC
550.00 ৳Read moreMystery Cloud 30A Brushless Speed Controller ESC Description : Cons-Current:30A. Max Current:35A. BEC:2A. Input:2-3S/5-12NC. Max RPM:20,000 (With A2212 / A2217 motors ). TIMING:N/A. PWM: N/A. Li-Poly 2-3 cells; Ni-MH 4-10 cells Auto Detect. Break On/Off; Progarmmable. Auto Low battery Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell Lipo. Size: 45X24X9mm approx. Note: battery and motor …
