Arduino CNC Shield V3
250.00 ৳
In stock
Arduino CNC Shield V3
This shield is designed to allow you to control a CNC router or milling machine from an Arduino board.
It contains 4 driver sockets which allow compatible A4988 or DRV8825 driver modules to be inserted providing the ability
to drive 3 stepper motor axis (X,Y, & Z) plus an optional 4th auxiliary motor.
Additional connectors provide easy connection of end stop sensors and control buttons.
Features:
GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (each axis pair shared by same IO pin)
Spindle enable and direct connection.
Coolant enables connection.
Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) see our module HCMODU0068
Jumpers headers to set the Micro-Stepping for the stepper drivers.
Compact design.
Stepper Motors can be connected with 4 pin dupont/molex connectors.
Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
Package included:
1 x 3D Printer Expansion Board
Related products
-
Sonar Distance Sensor (HC-SR04)
80.00 ৳Add to cartUltrasonic sensors overcome many of the weaknesses of IR sensors – they provide distance measurement regardless of color and lighting of obstacles. They also provide lower minimum distances and wider angles of detection to gaurantee that obstacles are not missed by a narrow sensor beam. Measurement Procedure & Formula: Distance measurements can be made with …
-
Fingerprint Scanner Sensor JM-101
1,100.00 ৳Add to cartFingerprint Scanner Sensor JM-101 The sensor is relatively easy to use with any TTL capable microcontroller or system. Although this is not the exact same sensor, it is compatible with the fantastic tutorial Adafruit has put together (just note that the pinout from the connector is different!). There is also free Windows-based software available – …
-
RDM 6300 RFID Module 125KHZ
300.00 ৳Add to cartRDM 6300 RFID Module 125KHZ RDM630 125KHz card mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. RDM630 Series non contact RFID module, use the advanced RF receiving circuit …
-
2.4GHz Wireless Module NRF24L01
130.00 ৳ – 330.00 ৳Select options2.4GHz Wireless Module NRF24L01 with antenna or without external antenna Description: The real GFSK monolithic transceiver chip Built-in hardware and link layer Automatic response and automatic retransmission function Address and CRC check function Channel switching time is very short, can be used for frequency hopping Fully compatible with nRF24XX series The global open ISM frequency …
-
Add to cart
ESP32-CAM WiFi + Bluetooth Camera Module Description: 1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system. 2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency …
