Floss 215 FPV Frame Kit V2 Carbon Fiber
2,499.00 ৳
Out of stock
Floss 215 FPV Frame Kit v2 Carbon Fiber
• 3mm Bottom plate with integrated SMA antenna loop and dedicated FC stack holes, which means the FC is not part of the frame structure any more and changing the rear arms is a breeze.
• Beefier 4mm Arms
• Bigger top plate allowing to top mount your battery with double battery strap slots.
• 20mm High quality textured stand offs allowing to fit micro or mini cameras, Full size will fit as well but micro and mini are highly recommended
Rack parameters:
Wheelbase: 215mm
Height：25mm
Arme: 4mm
Top plate: 2mm
Bottom plate: 3mm
Flight Control Mounting hole ：30.5*30.5mm
Camera Mounting Hole:30*30mm
Material: Carbon Fiber
Package:
1 x Floss 215 FPV Frame Kit v2 Carbon Fiber
Related products
-
DJI F450 Quadcopter Frame
950.00 ৳Add to cartFeatures: DJI F450 Quadcopter Frame Kit Built from quality glass fiber and polyamide nylon. Integrated PCB connections for direct soldering of your ESCs Pre-threaded brass sleeves for all of the frame bolts. Colored arms for orientation to keep you flying in the right direction. Large mounting tabs on main frame bottom plate for easy camera …
-
DETAI 242 Blue Thread Locking Glue
150.00 ৳Read moreDETAI 242 Blue Thread Locking Glue Item description: pure extension 242 thread locking glue Specification: 10g with bottle, Color: blue Origin: DETAI Features: removable Shelf life: two years Play a model aircraft essential Packet content: 1 x glue screw
-
Mini 250 Carbon Fiber FPV Quadcopter Frame
1,500.00 ৳Add to cartQAV250 Carbon Fiber Mini 250 FPV Quadcopter Frame(Unassembled) Description The Mini Quad is a low weight Mini Sport FPV Quadcopter frame. It was designed to make use of standard sized electronic equipment commonly used in RC. This allows the quadcopter to compete with larger quadcopters, while being smaller and agile ! Specifications Materials: 3k Weave …
-
Add to cartMatek Systems PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video …
-
Power Distribution Board
120.00 ৳Select optionsPower Distribution Board Features: – The whole board as a conductor,up to 100A input – Does not produce magnetic, less influence to sensor – One side for positve,another side for nagetive Specfications: – Special for MultiCopter battery connection – Up to 8 ESC/Motor can be connect to the Board – 100A maxium input – Weight:6.7 …
