MicroSD Card Module
99.00 ৳
In stock
- Supply voltage: 4.5V(min), 5V(typical), 5.5V(max)
- Current: 0.2mA(min), 80mA(typical), 200mA(max)
- Level conversion circuit board can interface: 5V or 3.3V
- Card supported: Micro SD card (<=2G),Mirco SDHC card (<=32G)
- Size: approx. 42 x 24 x 12mm
- Weight: approx. 5g
- Interface effect
- 1Pcs* MicroSD Card Module
Related products
-
Sonar Distance Sensor (HC-SR04)
80.00 ৳Add to cartUltrasonic sensors overcome many of the weaknesses of IR sensors – they provide distance measurement regardless of color and lighting of obstacles. They also provide lower minimum distances and wider angles of detection to gaurantee that obstacles are not missed by a narrow sensor beam. Measurement Procedure & Formula: Distance measurements can be made with …
-
Add to cart
6DOF MPU6050 3 Axis Gyro & Accelorometer Name: MPU-6050 module (three-axis gyroscope + triaxial accelerometer) 2.54mm pin spacing MPU-6050 Accelerometer + Gyro The MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip. It is very accurate, since it contains 16-bits analog to digital conversion hardware for each channel. Therefor it …
-
HC-06 bluetooth module
370.00 ৳Add to cartThis is a bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly. The HC-06 module is a slave only device. This means that it can connect to most phones and computers with bluetooth but it cannot connect to other slave only devices …
-
Add to cart
LM2596 DC-DC Buck Step Down Converter Module with LCD voltmeter Features: 1. Input voltage range: 4-40 v (40 v to limit the highest voltage). 2. Output voltage range:1.25V – 37V (decompression mode, input output must be greater than 2 V above). 3. Output current: 2 A continuous output. 4. Output power: the maximum 15 w. …
LM2596 DC-DC Buck Step Down Converter Module with LCD voltmeterRead More
-
Add to cart
XL6009 DC-DC Step Up Boost Module This module is a non-isolated step-up (boost) voltage converter featuring adjustable output voltage and high efficiency. Description:dc-dc-adjustable-step-up-converter-module-xl6009-replace-lm2577 XTW6009 is a 4 a switch current high-performance step-up (BOOST) module. The XL6009E1 module USES the second generation of high frequency switch technology as the core chip, LM2577 performance far beyond the …
