Radiolink M8N GPS SE100 Module with Stand
4,400.00 ৳
Available on backorder
Specification:
Brand name: Radiolink
Item name: M8N GPS Module
Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single
GNSS.
Velocity precision: 0.1m/s
Max height: 50000m
Max speed: 515m/s
Max acceleration: 4G
Max update rate: up to 18Hz
Sensitivity
Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm
Time to first fix: Cold start: 26s, Hot start:1s.
Power supply: voltage 3.3VDC+-5%, current 50~55mA
Ports:
A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K
B.Geomagnetic I2C interface
Feature:
Top Configuration
-GPS decoder chip: Radiolink M8N GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon
and 13 years of RF experiences, is much better than single GNSS 7N.
A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1
B.SBASL1 C/A:WAAS, EGNOS, MSAS
– Antenna : 2.5dbI high gain and selectivity ceramic antenna
– Power amplify IC: MMIC BGA715L7 from Infineon
– Filter: SAWF(Surface acoustic wave filter) form Murata
– Geomagnetic: HMC5983
Professional Design
Radiolink M8N GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation
of IC sensitivity index from circuit schematic design to PCB placement.
1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much
better than the similar products.
Package Included:
1 X Radiolink M8N GPS SE100 Module
1 X GPS Stand
Related products
-
Add to cartNodeMcu Lua ESP8266 Board with CP2102 SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Features: 1. Open-source 2. Interactive 3. Programmable …
-
ArduPilot APM 2.8 Flight Controller Combo
9,399.00 ৳ – 10,499.00 ৳Select optionsArduPilot APM 2.8 Flight Controller Combo Introduction: Eliminate V2.52 Version Old 1.0mm 6P SM06B GPS interface , changed to the DF13-4P compass external I2C interface, Place the DF13-5P GPS interface with external interfaces of the compass , more convenient to connections GPS with external compass. Replaced the V2.52 I2C interface to multi-purpose MUX interfaces, which …
-
DIATONE Mamba F405 Flight Controller
6,000.00 ৳Add to cartDIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter Specification: Item name: F405 Betaflight Flight Controller Input power: 10-28V (3-6S) BEC: 5V/1.5A MCU: STM32F405 Gyro: MPU6000 Flash: 16MB OSD: AT7456 Firmware: Fury F4 OSD Mounting hole: 30.5*30.5mm Weight: 6g Package Included: 1 x DIATONE …
-
APM Pixhawk Power Module With XT60
599.00 ৳Add to cartAPM Pixhawk Power Module With XT60 and BEC Specifications: APM Pixhawk Power Module With XT60 is a simple way of providing your APM and pixhawk with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum …
-
Ublox NEO-M8N GPS Module
2,400.00 ৳Add to cartUblox NEO-M8N GPS Module Features: Built-in compass GPS module Main chip: Ublox-M8N – With fast satellite searching speed and high precision – Includes round plastic shell and GPS folding support Package size: 15 x 12 x 2cm Package weight: 57g Packing Content: 1 x NEO-M8N Flight Controller GPS Module with Shell
