Name: SpeedyBee F405 V4 BLS 55A Stack
SKU: 10670
Price: 9400.00 BDT
Availability: InStock

SpeedyBee F405 V4 BLS 55A Stack

9,400.00 ৳

In stock

Description
Meta Information

SpeedyBee F405 V4 BLS 55A Stack

Elevate your drone’s performance with the SpeedyBee F405 V4 Stack, featuring STM32F405 MCU and ICM42688P gyro for precise control. The compact F405 V4 flight controller supports Bluetooth configuration and 6S LiPo power input, making it a versatile choice for FPV enthusiasts. Paired with the SpeedyBee BLS 55A 4-in-1 ESC, delivering up to 55A continuous current, these components ensure a powerful and reliable drone setup for your aerial adventures.

SpeedyBee F405 V4 Flight Controller:
MCU:STM32F405
IMU (gyroscope):ICM42688P
USB Port Type:Type C
Barometer:Buolt-in
OSD Chip:AT7456E Chip
BLE-Bluetooth:Supported, Uesd for Flight Control configuration(MSP should be enabled with Baud rate 115200 on UART4)
WIFI: Not Supported
Traditional Betaflight LED Pad: Supported.5V.G and LED pads on bottom of the front side.Used for WS2812 LED contrelled by Betaflight firmware.
Buzzer:Support .BZ+ , BZ- pad used for 5V buzzer
BOOT Button:Supported.
RSSI Input:Support. Named as RSon the front side
Smart Port:Not Support
Supported flight controller firmware: BetaFlight (default), INAV
Firmware target name:SPEEDYBEEF405V4
Mount:30.5×30.5mm (4mm hole diameter)
Dimensions:41.6(L) x 39.4(W) x 7.8(H) mm
Weight:10.5g

SpeedyBee BLS 55A 4-in-1 ESC:
Firmware:LHeli_S JH40
Wireless-configuration:Full configuration supported by SpeedyBee App
PC configurator download link:ttps://esc-configurator.com/
Continuous Current:55A*4
Break current:70A (10 seconds)
Protective Diode for TV:Yes
External Capacitor:1000uF Low ESR Capacitor (included in the package)
Protocol ESC:DSHOT300/600
Power Input:3-6S LiPo
Output power:VBAT
Current sensor:Support (scale=400 offset=0)
Mount:30.5×30.5mm (4mm hole diameter)
Dimensions:45.6(L)*44(W)*8mm(H)
Weight:23.5g

Package Included:
SpeedyBee F405 V4 Flight Control x 1
SpeedyBee BLS 55A 4in1 ESC x 1

Accessories pac x 1

F405-V4

Configure your FC and ESC via Bluetooth!

With SpeedyBee app, turn your phone into an all-in-one FC configurator and tune your quad anytime, anywhere. Enjoy wireless, fully configurable ESC experience with SpeedyBee app

F405-V4

ESC upgraded to 55A with heat sink.

The PCB design has been refined, with copper thickness increased from 2 to 3 ounces and enhanced MOSFET specifications. Continuous current now reaches 220A across all channels, peaking at 280A for 10 seconds. An added aluminum alloy heat sink ensures efficient MOSFET heat dissipation for stable ESC output. It delivers a genuine 55A output, primed for your baddest high-powered 6S motors.

F405-V4

ICM42688P Gyro and clean
power supply.

Featuring MaxLinear’s esteemed LDO power chip, the gyroscope gets dedicated power, enhancing surge protection by 320%. A 100uF filtering tantalum capacitor shields gyro data from power interferences. This ensures precise flight responsiveness, letting you truly savor the joy of flying!

F405-V4

Forgot your LiPo checker?
Just look at the FC!

On the side of the flight controller, you will find a 4-level battery capacity indicator. As soon as you connect the battery, you can instantly see the battery level, saving you the hassle of needing to put on glasses to check the battery status.

F405-V4

SD card compatibility issue fixed!

The F405 V3 FC faced compatibility issues with certain microSD cards, with a few even occasionally affecting the stable OSD display. The improved F405 V4 flight controller, however, addresses these challenges. It reliably supports C4, C6, C10, and higher cards at 2k/4k logging rates.

BF/INAV can recognize up to 4GB of black box space. Once you clear the SD card, you can enjoy 1000+ flights. Experience black box freedom like never before!

F405-V4

Change motor directions wirelessly!

Are you still using a computer to change motor directions? With this stack, when you finish your build, connect to the SpeedyBee app, change the motor directions just in a few simple steps*. Then take off.

* To use this feature, please go to the App > Motors > Motor Direction Settings.

F405-V4

8 motors output for X8/Y6/fixed-wings.

You could use this stack to build your X8 drones, Y6 drones or fixed wings. Forget about crawling through your massive build just to plug in that USB cable. Just take out your phone to configure everything in the SpeedyBee app.

F405-V4

4 sets of LED pads with simple switching.

Need more visibility at night? Just solder up your LED strips* and blaze the darkest trail you can find. With just one tap on the BOOT button, you can cycle through all different LED presets** and pick the one you love!

* LED strips could be purchased here
**Or long press the boot button to switch to Betaflight LED mode.

F405-V4

TVS Protective Diode + 21 Onboard TDK Capacitors + 1000uF High-Capacity Electrolytic Capacitor = Upgraded ESC Protection

We’ve included a TVS diode that effectively absorbs voltage spikes during power-up and crash events. The board features 21 high-quality Japanese TDK 35V 22uF SMD filtering and energy storage capacitors. These, along with the standard 1000uF high-frequency, low-ESR electrolytic capacitor, effectively filter out signal interference from the power supply to the flight controller’s gyroscope, ensuring smoother flight performance.

F405-V4

And packaged with more useful features.

● Built-in barometer for accurate height calculation
● SD card slot can support up to 4GB Blackbox data*
● Dedicated DJI Air Unit connector for a quick digital build
● 5V & 9V Dual BECs now upgraded to both 3A output
● 4 x UARTs for your receiver + VTX + camera + GPS
● Power your GPS with a USB cable – no battery needed,
No extra heat, no worries
● 22mm cutouts for FPV camera in your tight build

F405-V4