STC3028 Dual Display Temperature Humidity Controller For Egg Incubator
999.00 ৳
STC3028 Dual Display Temperature Humidity Controller For Egg Incubator
STC-3028 digital temperature & humidity controller for incubator can jointly monitor temperature and humidity. 110 – 230V AC voltage, 50 / 60Hz power supply frequency, -20 – 60°C temperature range, 0% – 100%RH humidity range, 0.3 °C temperature measurement accuracy, 3% humidity measurement accuracy, relay output control, 10A maximum output power, 85.5 x 75 x 34.3mm dimension.
Features:
1. Be able to control temperature and humidity at the same time.
2. Be able to connect with humidifier and dehumidifier equipment at the same time.
3 Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.
4. Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control.
5. Supporting Temp and Humidity Calibration
6. Dual Display Window, Be able to display measured temperature/humidity and set temp/humidity at the same time
Specifications:
Model: STC-3028
Input voltage: AC110~220V,12V,24V
Measuring temperature range: -50°～+110°
Measuring humidity range: 00%RH～+100%RH
Accuracy: ±1°, 0.1%RH
Relay output contact capacity: 10A/240VAC
Shell material: PC + ABS fireproof
Sensor length: 1m
Package:
1 x STC3028 Dual Display Temperature Humidity Controller For Egg Incubator
| Volt | 220V, 12V, 24V |
|---|
Related products
-
Fingerprint Scanner Sensor JM-101
1,100.00 ৳Add to cartFingerprint Scanner Sensor JM-101 The sensor is relatively easy to use with any TTL capable microcontroller or system. Although this is not the exact same sensor, it is compatible with the fantastic tutorial Adafruit has put together (just note that the pinout from the connector is different!). There is also free Windows-based software available – …
-
Add to cart
The TCS3200 Color Sensor Module uses a high-quality light sensor allowing you to sense any color through a combination of Red, Green, and Blue. The module provides all of the pins of the TCS3200 on convenient 0.1″ headers – ideal for use with PCBs, breadboard or strip board. The module requires only a single supply …
-
RDM 6300 RFID Module 125KHZ
300.00 ৳Add to cartRDM 6300 RFID Module 125KHZ RDM630 125KHz card mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. RDM630 Series non contact RFID module, use the advanced RF receiving circuit …
-
Add to cart
ESP32-CAM WiFi + Bluetooth Camera Module Description: 1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system. 2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency …
-
Flex Sensor 2.2″
1,400.00 ৳Add to cartFlex Sensor 2.2″ Inch Bend Flex Sensor For Robotic Hand Electronic Gloves Flex2.2 Flex Sensor Pressure Sensor Resistive Flex Sensor Robotic Arm Power Glove Measuring Bending DIY A flex sensor or bend sensor is a sensor that measures the amount of deflection or bending. Usually, the sensor is stuck to the surface, and the resistance of the sensor element is varied by bending the …
-
PIR Motion Sensor
99.00 ৳Add to cartPIR Motion Sensor PIR Motion Detector Module Features Settling time: 60 seconds Compact size (24 x 32 mm) Supply Voltage: DC3V-5V Current drain :< 50uA Voltage Output: High/Low level signal: 0-3.3V High sensitivity Delay time: 5s-18 minute(as customer requirement) Operation Temperature: -15oC -70 oC Infrared sensor: dual-element, low noise, high sensitivity Light sensor: CdS photocell …
