DIATONE Mamba F405 Flight Controller
5,500.00 ৳
Only 1 left in stock (can be backordered)
DIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter
Specification:
Item name: F405 Betaflight Flight Controller
Input power: 10-28V (3-6S)
BEC: 5V/1.5A
MCU: STM32F405
Gyro: MPU6000
Flash: 16MB
OSD: AT7456
Firmware: Fury F4 OSD
Mounting hole: 30.5*30.5mm
Weight: 6g
Package Included:
1 x DIATONE Mamba F405 Flight Controller
Related products
-
APM Pixhawk Power Module With XT60
599.00 ৳Add to cartAPM Pixhawk Power Module With XT60 and BEC Specifications: APM Pixhawk Power Module With XT60 is a simple way of providing your APM and pixhawk with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum …
-
Radiolink SE100 v2 GPS Module with Stand
4,499.00 ৳Add to cartRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
Add to cart2.4G 2Dbi Wireless SMA GSM Antenna with Female Plug 2.4G 2Dbi Wireless SMA GSM Antenna- (Small L-Type) is having a compact profile and good overhead clearance. This antenna is equipped with a 2400 MHz frequency and with a gain of 2Dbi. The compact size and the high performance make this device bang for a buck. …
2.4G 2Dbi Wireless SMA GSM Antenna with Female PlugRead More
-
Aocoda-RC F405 V2 Flight Controller
3,999.00 ৳Add to cartAocoda-RC F405 V2 Flight Controller Product parameters: Name: Aocoda-RC F405 V2 special flight controller Main control chip: STM32F405RGT6 MPU: MPU6500 Character overlay: AT7456E Black box: integrated 16M Flash Barometer: BMP280 Serial port: 4 optional Motor output: 8 channels optional LED strip: support Buzzer: support Input voltage: 3-6S Lipo Power output: 5V/2A, 9V/2A Weight: 6.0g Size: …
-
OMNIBUS F4 V3S Plus Flight Controller
3,899.00 ৳Add to cartOMNIBUS F4 V3S Plus Flight Controller F4 V3S Plus Flight controller: Item name: F4 V3 PLUS Flight Controller Firmware: OMNIBUSF4SD Size: 36x36mm Mounting holes: 30.5×30.5mm STM32 F405 MCU Dshot support Drag and Drop OSD configured via Betaflight MPU: MPU6000 (Send at random) SBUS / PPM AND Spketrum DSMX ports MicroSD card blackbox Baro (BMP280) 5v3a …
-
HC-06 bluetooth module
370.00 ৳Add to cartThis is a bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly. The HC-06 module is a slave only device. This means that it can connect to most phones and computers with bluetooth but it cannot connect to other slave only devices …
