Home

Showing 301–330 of 339 results

  • 3.17mm Aluminum Propeller Adapter Holder for Brushless Motor Prop Features: High quality aluminum material. Motor axle hole diameter: 3.17mm. Suitable for brushless motors and speed controllers. Delicate workmanship. Specifications: Color: Silver Material: Aluminum Motor Axle hole diameter: 3.17mm Single item size: 2.7 * 1.2cm(L * D) Single item weight: 4g Package including: 1x 3.17mm Propeller Adapter

    Add to cart
  • KK2.1.5 LCD Flight Control Board

    4,300.00 ৳ 

    KK2.1.5 LCD Flight Control Board (Red Switch) The kk 2.1.5 flight controller is next big evolution of the first generation KK flight controller boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than …

    KK2.1.5 LCD Flight Control BoardRead More

    Add to cart
  • DJI F330 RC Quadcopter Frame Kit Description: Model: Flame Wheel 330 Weight : 156g Diagonal Wheelbase: 330mm Color: White and Black,Red and White,Red and Black Recommended Configuration(Not included): 4 x A2212 Series Brushless Motor 4 x 20A Brushless ESC 4 x 8045 Propellers 1 x Battery 3S-4S  LiPo 1 x CC3D Flight Controller Features: – Frame …

    DJI F330 RC Quadcopter FrameRead More

    Add to cart
  • A2212/10T 1400KV brushless motor

    480.00 ৳ 

    Description: Model: xxd A2212 kv/V : 1400kv Improving efficiency max .: 80% efficiency power max .: 10-15a (> 75%) Current capacity: 18a / 60s no load current @ 10v: 0.5a no. Cell: 2-3 lithium poly engine size: Φ27.8 x 23mm shaft diameter: Φ3.17mm Weight: 36g Package contents: 1 x A2212/10t 1400kv outrunner brushless motor 1 …

    A2212/10T 1400KV brushless motorRead More

    Add to cart
  • Description: White Futaba logo Black adjustable strap clips Metal spring loaded clip Length:140mm Width:25mm Packet content: 1 x futaba Neck Strap

    Read more
  • 40mm Heat Shrink Tube

    40.00 ৳ 

    Product Name : Heat Shrinkable Tube Material : Polyolefin Rated Voltage : 600V Temperature Level : 125°C Diameter : 60mm (Before Shrinking) & 40mm (After Shrinking) Shrink Ratio: 2:1 Color : Black Package Content : 1 foot Red + 1 foot Black Heat Shrinkable Tube

    Add to cart
  • 25mm Heat Shrink Tube

    25.00 ৳ 

    Product Name : Heat Shrinkable Tube Material : Polyolefin Rated Voltage : 600V Temperature Level : 125°C Diameter : 40mm (Before Shrinking) & 25mm (After Shrinking) Shrink Ratio: 2:1 Color : Black Package Content : 1 foot Black Heat Shrinkable Tube

    Add to cart
  • Product Name : Heat Shrinkable Tube Material : Polyolefin Rated Voltage : 600V Temperature Level : 125°C Diameter : 8mm (Before Shrinking) & 4mm (After Shrinking) Shrink Ratio: 2:1 Color : Red + Black Package Content : 1 foot Red + 1 foot Black Heat Shrinkable Tube

    Add to cart
  • 7 inch TFT LCD Monitor

    3,200.00 ৳ 

    7 inch TFT LCD Monitor 800×480 Reversing Parking Monitor with 2 video input Designed specially for FPV and outdoor operation purpose. The monitor has very bright image(adjustable) and very wide power supply range(7-12V).The monitor also has a very important feature for FPV users. This feature makes you able to fly much further and never lose …

    7 inch TFT LCD MonitorRead More

    Add to cart
  • 60W 220V Solder Tool Heat Pencil Tip Soldering Iron green lead free iron for electronic hobby repair work students teaching lab using. Suitable: Great for electronic hobbies kits repair work student teaching lab using. Specification: Cable Length: 130cm Plug: BD plug Working Voltage: AC 220V – 250V Preheat:3-5 minutes Size (Dia x L): 20mm x …

    Soldering Iron 60W 220VRead More

    Add to cart
  • Metal Hobby Knife+5pcs Blade

    90.00 ৳ 

    Handle Material : Stainless Steel Type : Multi Knife Blade Material : Steel Application : PCB circuit board . Mobile phone film Packaging Checklist: 1 x Knife handles with Blade 5 x Blade sate

    Add to cart
  • APM Pixhawk Power Module With XT60

    599.00 ৳ 

    APM Pixhawk Power Module With XT60 and BEC Specifications: APM Pixhawk Power Module With XT60 is a simple way of providing your APM and pixhawk with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum …

    APM Pixhawk Power Module With XT60Read More

    Add to cart
  • Y Extension Lead

    90.00 ৳ 

    Description: Product name: 30 cm Y Extension Wire Lead For: Use For RC Car, Boat, Plane and Helicopter Servo Connection & receiver connection Package: 1 x 30 cm Y Extension Wire Lead

    Add to cart
  • GENUINE XT-60 Connector Item Description: Made of high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant Features: 1 Pair of high quality XT60 Male and Female power connectors. …

    GENUINE XT-60 ConnectorRead More

    Add to cart
  • S500 Quadcopter Frame

    3,000.00 ৳ 

    The S500 is supplied with 2 x blue and 2 x black arms that are super ridged and have a carbon fibre rod through the center making for the strongest arms we have seen to date in this style of frame. The Blue and black arms make orientation much easier and there is no need …

    S500 Quadcopter FrameRead More

    Add to cart
  • Suitable for using on most RC helicopter and plane Great for small Lipo and NiMh connection. Wire Length: 15 cm + 15 cm. Color: Red + Black Package: 1 x 15cm Male JST connector plug 1 x 15cm Female JST connector plug

    Add to cart
  • Tower Pro MG995 Digital Metal Gear Servo

    450.00 ৳ 

    Tower Pro MG995 Digital Metal Gear Servo for RC Car, Robot Servo 13 KG Torque. Specification: Dimension : 40mm x 19mm x 43mm Original box: NO Net weight: 69g Package weight: 75g Color: Black Operating Speed : 0.17sec / 60 degrees (4.8V no load) Operating Speed : 0.13sec / 60 degrees (6.0V no load) Stall …

    Tower Pro MG995 Digital Metal Gear ServoRead More

    Add to cart
  • Antiskid Velcro Tie 2×20 cm

    40.00 ৳ 

    Specifications: High quality and durable in use, Easy to install. Product size: 20 x 2 cm Color: Black/Red/Blue (Random) Package list: 1 x RC Battery Antiskid Velcro Tie Down Straps 20x2cm Blue.

    Add to cart
  • 22 Series Brushless Motor Base

    110.00 ৳ 

    Compatible:2204, 2208, 2212, 2216, 2217 series.

    Add to cart
  • Power Distribution Board Features: – The whole board as a conductor,up to 100A input – Does not produce magnetic, less influence to sensor – One side for positve,another side for nagetive Specfications: – Special for MultiCopter battery connection – Up to 8 ESC/Motor can be connect to the Board – 100A maxium input – Weight:6.7 …

    Power Distribution BoardRead More

    Select options
  • Mystery Cloud 30A Brushless ESC

    550.00 ৳ 

    Mystery Cloud 30A Brushless Speed Controller ESC Description : Cons-Current:30A. Max Current:35A. BEC:2A. Input:2-3S/5-12NC. Max RPM:20,000 (With A2212 / A2217 motors ). TIMING:N/A. PWM: N/A. Li-Poly 2-3 cells; Ni-MH 4-10 cells Auto Detect. Break On/Off; Progarmmable. Auto Low battery Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell Lipo. Size: 45X24X9mm approx. Note: battery and motor …

    Mystery Cloud 30A Brushless ESCRead More

    Read more
  • White Cable Ties

    30.00 ৳ 50.00 ৳ 

    Cable ties are the most convenient and cost effective method for securing cables and bundled items. All sizes UL approved to a fire safety rating of UL94V-2. Available in white. Strength: 6kg /10kg Pack Quantity: 1 x 50pcs  White Cable Ties size select from option

    Select options
  • USB Flight Simulator

    1,600.00 ৳ 

    22 In 1 USB Flight Simulator For G7 G6.5 Phoenix 5.0 XTR FMS Aerofly Item Name: 22 in 1 simulator Language: Chinese,English Support software: XP windows7 Windows8 Vista Transmitter compatible: WLFY , JR , FUTABA , Walkera , FS , KDS Features: Latest 22 In 1 Simulator with standard USB interface Support RealFlight G2/G3/G3.5/G4/G4.5/G5/G6.5/G7 Support …

    USB Flight SimulatorRead More

    Read more
  • Hot Glue Stick

    15.00 ৳ 

    Hot Glue Gun Sticks, 11mm. Standard clear multi temp, all-purpose adhesive bonds many plastics, wood products, fabric, leather, foam, PVC, polycarbonate, paper, ribbon and aluminum. Low temp gun to bond more delicate materials such as foam, fabric or florals. High temp gun to bond less porous materials such as wood, glass and metal. 11 mm …

    Hot Glue StickRead More

    Add to cart
  • Emax XA2212 980KV Brushless Motor For RC Models Model: X2212 980KV KV(rpm/v): 980 Diameter: 28.5mm Shaft Diameter: 3mm Length: 44mm Lipo Battery (cell): 2S-3S Li-poly Color:Silver Weight: 74g Suitable propellers Dimension: 10×4.7,9×6 MAX Thrust: 880g Package Included: 1 x Emax XA2212 Brushless Motor 1 x Emax Motor Accessories

    Add to cart
  • Emax XA2212 1400KV Brushless Motor For RC Models Model: X2212 1400KV KV(rpm/v): 1400 Diameter: 28.5mm Shaft Diameter: 3mm Length: 44mm Lipo Battery (cell): 2S-3S Li-poly Color:Silver Weight: 74g Suitable propellers Dimension: 8040,8060 MAX Thrust: 940g Package Included: 1 x Emax XA2212 Brushless Motor 1 x Emax Motor Accessories

    Add to cart
  • 60W Hot Glue Gun

    230.00 ৳ 

    Feature: Hot Melt Glue Gun. Great for artificial flowers, craft projects, furniture and wood working. Power: 60W. Voltage: 100-240V. Frequency: 50-60Hz For bonding jobs: Toys and Models Artificial Flowers Decorations Furniture Woodworking Cardboard and much more Package Included: 1 x Hot Glue Gun 1 x Hot Glue Stand Quick reminders: -Always make sure to clean …

    60W Hot Glue GunRead More

    Add to cart
  • 3CH Channels ESC Servo Tester

    180.00 ৳ 

    Features: There are 3 modes to check servos or ESC: Manual mode: turn the knob with different speed, check the reaction time; Neutral mode: make the servo go back to the neutral point; Automatic “window wiper” mode: make the servo swing like a window wipers in the biggest angle. It can connect 1-3 servos simultaneously …

    3CH Channels ESC Servo TesterRead More

    Add to cart
  • QAV250 Carbon Fiber Mini 250 FPV Quadcopter Frame(Unassembled) Description The Mini Quad is a low weight Mini Sport FPV Quadcopter frame. It was designed to make use of standard sized electronic equipment commonly used in RC. This allows the quadcopter to compete with larger quadcopters, while being smaller and agile ! Specifications Materials: 3k Weave …

    Mini 250 Carbon Fiber FPV Quadcopter FrameRead More

    Add to cart
Open chat
1
Scan the code
RC shop bd
Hello
How may we Help you?